Posts Tagged ‘Server Image’

 

How to Create a GoGrid Cloud Server Image for Rapid Scalability

Thursday, January 31st, 2013 by

Let’s say that you have fully configured a Cloud Server running on GoGrid. You’re so proud of your achievement that you want to share your configuration with your team or perhaps even with the GoGrid community. And let’s imagine that you or your company has developed a software solution that you’d like to monetize within a Public Cloud. Well, the process of creating and sharing a GoGrid Cloud Server Image (GSI) is easy and literally takes just a few minutes.

image

Similar to our previous “How To” article and video (“How to Select, Configure, & Deploy a GoGrid Cloud Server in Minutes”), the process of creating a GSI is straightforward and can be simplified into 3 easy steps:

1. Select
2. Save
3. Share

Before I show you how easy it is to create a GoGrid Cloud Server Image, here are some ways you might use it:

  • To reduce setup and configuration times for new servers
  • To enable rapid horizontal scaling of servers
  • To create a back-up repository of your GoGrid servers
  • To share your server configuration with your team for future cloud deployments
  • To monetize a software solution

(more…) «How to Create a GoGrid Cloud Server Image for Rapid Scalability»

How to Set Up a Gluster File System within the GoGrid Cloud (Part 1)

Friday, August 19th, 2011 by

In this blog post series, I want to take a closer look at a storage technology called Gluster File System, and how it can be set up (this article), connected to (article #2) and expand storage (article #3). This is the first blog post of the series and I will review what GlusterFS is, why you would consider using it, and how to deploy it using the GoGrid GlusterFS Partner GSI.

image

GoGrid offers a great storage solution called Cloud Storage. But what if you want to deploy your own storage so that you can directly control performance and redundancy? What software would you use to provide this? The simple answer is Gluster. It is a powerful software-based storage solution that offers a centralized controlled storage pool management system that is very easy to use.

There are many different ways to take advantage of the GlusterFS storage solution. (Note: in the descriptions below a “brick” is a GoGrid Virtual Server.)

1. Distributed Volumes:

“Distributed volumes distribute files throughout the bricks in the volume. You can use distributed volumes where the requirement is to scale storage and the redundancy is either not important or is provided by other hardware/software layers.” – Gluster.org

(more…) «How to Set Up a Gluster File System within the GoGrid Cloud (Part 1)»

How to Monitor Your Windows 2008 Server on GoGrid with Cacti 0.8.7g

Tuesday, June 14th, 2011 by

This is the 3rd and final post in my setup and use of the GoGrid Community GSI server for Cacti Monitoring. In my first post, “Set Up A Cacti Monitoring Server in Minutes with this GoGrid Community Server Image,,” I covered how to deploy Cacti in your GoGrid environment using a Community GSI. My second post, “How to Monitor Your Ubuntu Server on GoGrid in 6 Steps Using Cacti 0.8.7g,” I discussed how to initiate monitoring of your GoGrid Ubuntu server. Now to round things off, I want to show you how to link up your Cacti monitoring server to a Windows Server 2008 server on your GoGrid network. The base install of Cacti 0.8.7g will allow you to monitor the server’s bandwidth utilization, Ethernet errors, number of logged in users, and total number of processes. There are other templates available to monitor other components and services on your Windows server, but they require using an additional SNMP service beyond the Microsoft SNMP service. My blog post won’t get into the latter, but I will cover the former.

Objectives:

  1. Configure GoGrid private network connectivity on Windows 2008 Server and test connectivity to Cacti server
  2. Configure and start Microsoft SNMP service on your Windows 2008 Server
  3. Add new Cacti device
  4. Create graphs to log Local Connection and Local Connection 2 bandwidth and errors, Logged in Users, and server processes

Configure GoGrid private network connectivity on Windows 2008 Server and test connectivity to Cacti server

Below we see that we have a server (“Web2”) deployed on GoGrid with a public IP. Let’s log into this server and configure the private network with a private IP from the same subnet of the Cacti Monitor server. As I described in my previous post – I am using the prescribed private IP subnet from my GoGrid portal, contained under the List tab and then under Network – Private Network.

Selection_101

(more…) «How to Monitor Your Windows 2008 Server on GoGrid with Cacti 0.8.7g»

MyGSI Update and Tutorials – Save Server Images in One Step!

Monday, March 14th, 2011 by

Last week we announced several updates to GoGrid’s cloud infrastructure services. One of the highlights of this update was the enhancement we made to the saving your GoGrid Server Images (MyGSI) process.

Up till now, saving your MyGSI has been a fairly simple 3-step process that was helpful for horizontal scaling, re-imaging of servers, disaster recovery, or setting up failover environments. Through the update, this process can now be completed in a single step.

We’ve created several helpful tutorials to help educate users on the new process. Please reference our video and text tutorials below or take a look at the MyGSI User Manual on the GoGrid wiki for more information regarding the new process.

Video Tutorial

Below is a video screencast on how to create a GoGrid Custom Server Image (MyGSI). (Direct YouTube link)

Text Tutorial

(more…) «MyGSI Update and Tutorials – Save Server Images in One Step!»